You have no items in your shopping cart.
All tops are 38mm thick with solid edging. Tops are finished with water based lacquer tested to BS6250 severe rating to give a durable finish. The Boardroom table tops are veneered with the grain direction running along the top length and they come with four different top shapes.
GENERAL PRODUCT INFORMATION
Product Strength and Stability
All products are designed to meet the strength and stability requirements of BS4875 and BSEN 527.
Timber, Veneers, Sheet Materials and Fittings
All the materials and components used in our products are carefully selected for quality and durability. The lacquers we use for finishing require no maintenance. Cleaning should be carried out using a damp cloth and soft duster, a little vinegar or detergent can be added to the water to remove greasy marks.
Spray or wax polishes must not be used.
We cannot be held responsible for damage to the lacquer surface as a result of using these materials. It should be remembered that most natural timbers change colour on exposure to light. The amount and speed of change varies according to species of timber, the length of exposure and the intensity of the light. It is therefore likely that there will be an initial colour mismatch between new items of furniture and those that have been in use for some time; this colour difference will even out over a period of time. Wood is a natural material and we cannot guarantee the continuity? of grain and texture in products or samples.
Natural wood veneers can be subject to surface cracking as a result of prolonged exposure to low levels of humidity; our guarantee does not cover this phenomenon. The above comments do not apply to laminate or melamine faced chipboards, where any initial colour difference is usually much less and any subsequent change is very small.
Wherever possible we use timber-based materials, which are sourced from countries which have a defined and implemented policy for the management of timber resources.
We reserve the right to alter designs and specifications without notice.
All our products are guaranteed for a period of three years against any failure due to faulty materials or workmanship.
Steamed Beech Code 'SB'
Sapele Shade 3 Code 'SAP3'
Oak Code 'OAK'
Cherry Shade 3 Code 'CHY3'
Ash Code 'ASH'
Kevasingo Shade 3 Code 'KEV3'
American Black Walnut Code 'WALNUT'
Crown Cut Maple Code 'MAPLE'
English Pippy Oak* Code 'PIPPY'
Bird’s Eye Maple* Code 'BEMAPLE'
We are able to offer many different species of exotic veneers including Burr Walnut, Madrona, Wenge, Zebrano and Smoked
Swiss Pear (as illustrated in the Oracle brochure). Pricing for these options is available on request.
Bird’s Eye Maple/ Crown Cut Maple/ Black Line Inlay Bird’s Eye Maple/ Cherry/ Black Line Inlay Crown Cut Maple/ Cherry/ Black Line Inlay English Pippy Oak/ Oak/ Black Line Inlay Kevasingo/ Mahogany/ Black Line Inlay Burr Walnut/ American Black Walnut/ Black Line Inlay Crown Cut Maple/ American Black Walnut/ Black Line Inlay First veneer finish indicates veneer on the inner panel. 2nd veneer is the perimeter cross banding. For pricing always use the price band for the veneer on the inner panel.
All tops are 38mm thick with solid edging. Tops are finished with water based lacquer tested to BS6250 severe rating to give a durable finish. The boardroom table tops are available in 6 different tops shapes.
• Semi-Circular ended
• Dual Curve
Each top shape with a choice of 7 different edge details:
V panel under frame, panels 30mm thick with 10mm solid lipping. The arrowhead bases are fitted with 3-way plastic trunking, cable riser with matching veneered cover panels.
Wing profile base with optional integral wire management capability.
Chrome Steel Base
T frame chrome base with cross rail. Limited wire management options available with this base style.
Tri-pointed profile base with optional integral wire management capability.
Polished Chrome Pedestal Base
Chrome column base either with a trumpet style or domed chrome base. Limited wire management options available with this base style.
Cylindrical Wooden Base
Matching veneered cylindrical shape base mounted on a circular MDF base with a durable gun metal finish with optional integral wire management including the Monitor lift option.
Conical Wooden Base
Matching veneered cone shape based mounted on a circular MDF base with a durable gun metal finish with optional integral
wire management capability.
Slab End Base
30mm thick 10mm solid lip panels linked with 2 shallow modesty panels. Panel bases are fitted with 3-way plastic trunking, cable riser with matching veneered cover panels.
Square base with hinged door access as standard with optional integral wire management including the Monitor lift option.
Wire Management Options
The Oracle range comes as standard with optional integrated wire management facilities ranging from simple wooden cable
ports to fully integrated monitor lifts. See page 18 for full specifications and option availability.