You have no items in your shopping cart.
Tri-pointed profile base with optional integral wire management capability. All tops are 38mm thick with solid edging. Tops are finished with water based lacquer tested to BS6250 severe rating to give a durable finish. The Boardroom table tops are veneered with the grain direction running along the top length and they come with four different top shapes.
The modules project below the underside of the table top and are therefore visible
Due to the overall size of these modules they cannot be fitted directly over the bases. We would normally suggest these modules are fitted towards the middle of
The units have to be positioned off centre in the top to clear the frame cross rail.
The modules cannot be positioned directly over the base and they project below the underside of the table top
Wooden Cable Port
80 diameter wooden cable port surface mounted into table top.
Full Wire Management
This option includes the shuttle power module with 2 x 13 amp power, 2 x RJ45 sockets, 1 x VGA socket and 1 x mini jack, the recessed veneered cable port and the integral cable access in the base.
Integral Cable Access
This option provides for a matching hinged door or removable panel to access a void for bringing cabling discreetly to the table top.
Recessed Veneered cable port
Both the shuttle and Horizon power module can be recessed into the table top and supplied with a removable matching veneer cover panel to discreetly blend in into the table. Power modules priced separetely.
Hinged Veneered Flap Wire Management Access
Both the shuttle and Horizon power module can be recessed into the table top and supplied with a hinged matching veneer cover panel in the base to discreetly blend it into the table. Power modules priced separately
Wire Management Trough
Where the base style allows an optional trough with base can be specified to carry additional cabling and AV equipment.
Shuttle Power Module
The surface mounted shuttle power module comes as standard with 2 x 13 amp power, 2 x RJ45 sockets,1 x VGA socket and 1 X mini jack. This module allows the equipment to be connected whilst still allowing the module to be pushed back into the closed position.
Horizon Power Module
The surface mounted shuttle power modules comes as standard with 2 x 13 amp power, 2 x RJ45 sockets,1 x VGA socket and 1 X mini jack.
Dynamic Power Module
The surface mounted shuttle power modules comes as standard with 2 x 13 amp power, 2 x RJ45 sockets,1 x VGA socket and 1 X mini jack. The rotating action allows the plug sockets to be closed when not in use.
On the Cylindrical and the Square table options the bases can be increased in width to allow for ancilliary storage for possible AV or other types of equipment.
On the Cylindrical and the Square base options the bases can be increased in width to accommodate a remote control monitor lift with integral flap built in to the table to allow presentation equipment to be fully incorporated into the table.
A flexible vertical cable trunking that can be fitted to the underside of the table to provide a means of bringing cabling from the floor to the table top.
|Manufacturer's Suggested Retail Price||£75.00|